USA
USA
Latin America
Brazil & Portugal
888-800-2310 (Toll Free) 989-681-2158 (Local/International) 740 E Monroe Road, St. Louis, MI 48880
517-579-3061 Teléfono en México: 55-5351-3093 info@brinechlor.com
55-13-997855697
Yes, the MaxPro™ RA actuator can be operated using either compressed air or nitrogen.
The events or alarms for the MaxPro RA™ system are loss of pressure, signal from leak detection system, and activation of the E-stop on either the control panel or remote E-Stop panel.
Yes, if the MaxPro™ RA air receiver is included with the system it will close the container or cylinder valve. The reservoir makes the system “fail-safe”.
The operating pressure for the MaxPro™ RA actuator is 90 PSIG.
Yes, the MaxPro™ RA is designed for valves with square drive stems. The MaxPro™ SG operates on valves equipped with handwheels.
The MaxPro™ SG is used on low torque valves that are either equipped with handwheels or valve stems. The MaxPro™ SG produces less torque than the standard MaxPro™ RA closure system?
The MaxPro™ SG is used on tube trailers and other containers and cylinders that are equipped with handwheels.
The MaxPro™ SG can be operated using nitrogen.
The output torque on the MaxPro™ SG ranges from 20 to 40 ft/lbs.
Yes, the MaxPro™ SG can be used for the transfer of explosive chemicals. The system is pneumatically operated.
No, removal of the hand wheel is not required.
The applications for which the MaxPro™ SG is used for are anhydrous HCl, ethylene oxide, and trimethylamine.
