USA
USA
Latin America
Brazil & Portugal
888-800-2310 (Toll Free) 989-681-2158 (Local/International) 740 E Monroe Road, St. Louis, MI 48880
517-579-3061 Teléfono en México: 55-5351-3093 info@brinechlor.com
55-13-997855697
Success Stories Associations
USA
USA
Latin America
Brazil & Portugal
888-800-2310 (Toll Free) 989-681-2158 (Local/International) 740 E Monroe Road, St. Louis, MI 48880
517-579-3061 Teléfono en México: 55-5351-3093 info@brinechlor.com
55-13-997855697
Success Stories Associations
Contact

E-Pro FAQ

Powell > Resources > FAQ > E-Pro FAQ

Frequently Asked Questions About E-Pro Valve Closure Systems

Can the E-Pro® Valve Closure actuator be used on both chlorine and sulfur dioxide valves?

Yes, the cylinder and container valves for chlorine and sulfur dioxide are the same valve.

Does E-Pro® actuator provide automatic opening of valves?

No, the E-Pro® Valve Closure System is a close only system.

Can the output of the E-Pro® be changed?

No, the closing torque of the E-Pro® actuator cannot be changed. The output torque range for the E-Pro® is 35-40 ft/lbs of torque.

Can the E-Pro® be used on containers and cylinders of explosive gases or liquids?

No, the E-Pro® is electrically operated, and cannot be used on containers or cylinders of explosive gases or liquids.

If electric power is lost, will the E-Pro® actuator close the container or cylinder valve?

Yes, the Uninterruptible Power Supply (UPS) is the source of electric to close a container or cylinder valve in the event of an electrical power loss.